
Table of Contents
The Hyundai Creta is one of Delhi NCR's most popular SUVs, and higher variants pack a panoramic sunroof, twin 10.25-inch screens, ventilated seats and Level 2 ADAS.
More electronics and glossy trims mean more to check. A Hyundai Creta Pre-Delivery Inspection (PDI) before RTO registration makes sure the car you're handed is in the condition you're paying for. Here are the 10 checks to complete at the Hyundai dealership before you sign the handover form.
Hyundai Creta PDI checklist: 10 checks
1. Panoramic sunroof, glass and seals
On variants with the panoramic sunroof, open and close it fully a few times (by switch and, where fitted, by voice). The motor should run smoothly without hesitation. Check the tracks for debris and the rubber seals for even contact, so there are no leaks in the monsoon.
2. Paint thickness (catching stockyard touch-ups)
Shades like Abyss Black, Titan Grey and Atlas White show swirls and transit scratches easily. A paint thickness gauge measures every panel: factory paint reads fairly uniform, while a panel touched up after a yard scratch reads noticeably higher.
3. Screens, smartphone connection and audio
Test touch response on the infotainment screen, wireless Android Auto and Apple CarPlay where fitted, and the cluster's display modes. On variants with the Bose system, play music at different volumes and listen for distortion or door-pad rattles.
4. OBD2 engine and gearbox scan
Whether it's the 1.5L petrol, the 1.5L turbo petrol with DCT, or the 1.5L diesel, an OBD2 scan checks for stored and pending fault codes and confirms the battery charging voltage is healthy.
5. ADAS sensors and cameras
On ADAS variants, check the front radar and the windscreen camera housing for scratches or misalignment. Engage reverse to test the reversing or 360° camera, and check the blind-view monitor where fitted: the feeds should be sharp and lag-free.
6. Ventilated seats and AC
On variants with ventilated seats, check airflow on both front seats. Set the AC (dual-zone where fitted) to the lowest temperature and confirm strong cooling, including from the rear vents.
7. Panel gaps and LED lights
Check even gaps around the bonnet, fenders, tailgate and doors on both sides. Make sure the full-width LED light bar, indicators and tail lamps light up evenly, with no moisture inside the housings.
8. VIN and tyre dates
Match the 17-character VIN with your invoice and Form 22, and check the manufacturing month. Read the 4-digit date code on every tyre (for example, 3826 means week 38 of 2026), including the spare.
9. Underbody and fluids
Check engine oil, coolant and brake fluid levels, and look under the car with a torch for ramp scrapes, leaks or early surface rust.
10. Odometer and delivery kit
The odometer should show only a small reading from factory testing and transport; ask about anything unusually high. Check for both keys, the toolkit, jack, warning triangle and owner's manual.
Book your Hyundai Creta PDI in Delhi NCR
Don't sign the registration form after a 5-minute showroom walkaround.
A trained CarParakh inspector comes to your Hyundai dealership with a paint thickness gauge, OBD2 scanner and our 300+ point checklist, and you get a PDF report with photos before you sign. Independent, with no dealer tie-ups.
Frequently Asked Questions
Should I do a PDI on a brand-new Hyundai Creta?expand_more
Yes. A pre-delivery inspection checks your allotted Creta for transit paint damage, a weak battery from stockyard storage and electrical glitches before the car is registered in your name.
Will the dealer let an independent inspector check my Creta?expand_more
Ask the dealer in advance and agree a time when your allotted car is available in the stockyard or delivery bay. Explain that you want the car checked before you accept delivery.
When should I book a Hyundai Creta PDI?expand_more
As soon as the dealer confirms the car (VIN) allotted to you, and before you sign the delivery acceptance or pay the balance.
Does a PDI guarantee my Creta has no defects?expand_more
No. The report records the car's condition on the day of the inspection. Some intermittent or hidden faults may not show during a single check.
